Thin Film Materials Logo
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
photo-hd-edc41211000_std

Pneumatic Al Angled Block Valves (KF flanged)

Recommended for rough and high vacuum environments.

Overview of Pneumatically Actuated Valves

Pneumatically actuated valves are engineered to operate effectively even at ultra-low pressures, reaching down to less than 1 x 10⁻⁹ torr. These valves are constructed from 316Ti stainless steel, featuring robust formed bellows that can withstand up to 10 million cycles, ensuring durability and reliability in various applications.

Performance Specifications

Designed for high performance, these valves can be baked to temperatures of 100°C, making them suitable for environments that require heat treatment. They boast a leak rate of less than 1 x 10⁻⁹ mbar l/sec, highlighting their efficiency in maintaining pressure integrity.

Operating Mechanism

The valves operate in a single-acting configuration, utilizing air to open while employing a spring mechanism to close. This design ensures quick response times and reliability during operation.

Additional Features

For enhanced functionality, optional reed switch position indicators are available, providing clear feedback on valve status. Additionally, TFM offers a choice of control solenoids, including a 24VDC option, with other voltage specifications also available to meet specific requirements.

Specifications Table

ManufacturerTFM
PressureTorr
7.520 x 10-10 Torr
mbar
1.000 x 10-9 mbar
RatesLeak Rate
1.000 x 10-9 mbar*L/s
7.520 x 10-10 Torr*L/s
TemperatureActuator
100 ºC
212 ºFClosed Bake
100 ºC
212 ºFOpen Bake
100 ºC
212 ºF
Actuator
Type		Pneumatic Single Acting
Solenoid Kit
Included		No
Bonnet
Seal Type		Fluorocarbon (FKM)
Valve Body
Material		HE30TF Al
Poppet
Material		Fluorocarbon (FKM)
Shaft
Seal		Bellows

Ordering Table

New wpDataTable

Drawing Flange Size Bonnet Seal Type Voltage Part Number
Tooltip KF16 (1.18" OD) Fluorocarbon (FKM) 110/120VAC C41203000
Tooltip KF25 (1.57" OD) Fluorocarbon (FKM) 220/240VAC C41301000
Tooltip KF25 (1.57" OD) Fluorocarbon (FKM) 110/120VAC C41303000
Tooltip KF40 (2.16" OD) Fluorocarbon (FKM) 220/240VAC C41401000
Tooltip KF40 (2.16" OD) Fluorocarbon (FKM) 110/120VAC C41403000

Reviews

There are no reviews yet.

Be the first to review “Pneumatic Al Angled Block Valves (KF flanged)”

Your email address will not be published. Required fields are marked *

Related Products

Related products

FAQ

Sputtering targets are materials used in thin-film deposition processes to create coatings on substrates. They are used in industries like semiconductors, optics, photovoltaics, and electronics.

Evaporation materials are used in Physical Vapor Deposition (PVD) processes, where materials are heated and evaporated to form a thin film on a substrate. These are critical for applications in optics, wear protection, and decorative coatings.

Boat crucibles are used as containers for evaporation materials during PVD processes. They help to uniformly evaporate materials onto the substrate for thin film formation.

Sputtering uses energetic particles to eject material from a target, while evaporation involves heating a material until it vaporizes and deposits on a substrate. Both are common methods in Physical Vapor Deposition (PVD) for creating thin films.

Consider the material composition, purity, target size, and application-specific requirements such as the thickness and uniformity of the film.

Yes, we offer customized sputtering targets, evaporation materials, and crucibles to meet specific customer requirements for size, material composition, and purity.

Yes, we can assist in selecting the most suitable material based on your application, whether it’s for optical coatings, semiconductor fabrication, or decorative finishes.

Yes, we offer both bulk and small quantities of sputtering targets, evaporation materials, and spherical powders to support research, prototyping, and development projects.

Shopping Cart
Scroll to Top