Conductive Elastomer Discs & Sheets
An economically attractive substitute for silverfilled pastes normally used in target bonding.
When placed between the back of a (clamped, not bonded) target and the cooling well of a magnetron sputter source, these sheets enhance thermal transfer, especially for targets that have poor thermal contact or conductance.
- Made of a vacuum-compatible 0.020″ thick silicone rubber
- Contain silver-coated copper powder filler
- Reusable
NOTE: For other sizes not listed, please contact our Materials Department by clicking here for pricing and availability.
Specifications
| Conductive Elastomer Sheets/Discs | |
| NASA Rating | Type A |
| Elastomer Binder | Silicone |
| Conductive Filler | Silver/Copper |
| Volume Resistivity (as supplied) | 0.004 ohm-cm |
| Hardness | 65 Shore |
| Specific Gravity | 1.9 |
| Tensile Strength | 200 psi |
| Elongation | 100% |
| Tear Strength | 40 lb./in. |
| Compression Set (70 hrs @ 100˚) | 32% |
| Low Temp Flex | -65˚C |
| Max. Continuous Use Temp | 125˚C |