Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Palladium Sputtering Target, Pd

Material: Palladium Sputtering Target
Formula: Pd
Catalog No.: TFM-SPT-0472

Elemental Pd target for sputtered films. Define purity and trace limits, cathode geometry, backing, and film qualification checks. Grade, dimensions, assembly, documentation and availability are confirmed in the quotation.

What is a palladium sputtering target?

A palladium (Pd) sputtering target is an elemental-metal source for Pd-containing thin films. Target purity and surface condition should be specified against the layer's contamination and uniformity requirements rather than treated as a film-performance guarantee.

Explore related materials in the Sputtering Targets catalog.


Palladium

Material and Deposition Characteristics

Because the target is electrically conductive, DC magnetron sputtering is often applicable, although pulsed-DC or other power modes may also be used depending on the deposition system and film target. For high-specification films, target grain structure, residual stress, and surface preparation can influence erosion uniformity and the morphology of the deposited layer. When higher power loading or system-specific mounting is involved, a bonded target assembly may also be considered.

Element reference versus target specification

Elemental palladium (Pd) has a melting point of approximately 1554.9 °C and bulk density of approximately 12.02 g/cm³ (PubChem element reference). These elemental constants do not establish an available target size, grade, bond type or film property. Confirm order-specific requirements and evidence in the quotation.

How to specify palladium sputtering target for an RFQ

The following fields define the order and the tests needed to qualify this target; final availability and acceptance criteria belong in the approved quotation or drawing.

DecisionInformation to provide or verify
Material identityState Pd grade and trace-element limits, plus any lot inspection or document requirements.
Target and cathode fitSupply the target and cathode drawings, thickness, mounting interface, and backing or bonding requirements.
Film acceptanceIdentify film thickness, continuity, composition, or functional tests relevant to the actual application.

Send the specification and drawing for review. The selected source or target and the deposited film require separate acceptance evidence.

Research applications and film checks

  • RF-sputtered Pd films have been studied as hydrogen-sensing layers on flexible and rigid substrates. Reported response and structural behavior varied with film thickness, substrate and test conditions (research example).
  • For a hydrogen-sensing study, define the substrate, film thickness, operating temperature and hydrogen exposure range, then test response/recovery and film integrity in the actual device.
  • Target grade, geometry and backing are procurement decisions; sensor performance is a separate film/device qualification and is not guaranteed by target selection alone.

Target Configuration and Ordering Considerations

For quotation and manufacturability review, provide target size, thickness, purity or alloy composition, quantity, and the sputtering gun or cathode model if known. If a bonded assembly is required, include backing-plate material, bonding preference, and any dimensional tolerances, surface-finish needs, or inspection-document requirements. TFM can also review customer drawings or old-target samples for replacement builds.

Frequently Asked Questions

Can Palladium sputtering targets be used with DC magnetron sputtering?

Yes. Conductive metallic targets are commonly processed with DC magnetron sputtering, although pulsed-DC or other modes may also be used depending on the equipment and film objective.

What purity grade should I choose for a Palladium target?

The required purity should be selected from the contamination limits and performance needs of the deposited film. Higher purity can reduce unwanted impurities, but the optimum grade should match the application rather than default to the highest available level.

Why do density and microstructure matter for Palladium targets?

Target density, grain structure, and residual stress can influence erosion behavior, process stability, and the morphology of the deposited film. These factors become more important as film-quality requirements become tighter.

Can a Palladium target be bonded to a copper backing plate?

A backed assembly may be assessed from the cathode drawing, target dimensions and operating conditions. TFM should confirm backing material, bonding method and availability in the quotation rather than treating them as standard for every order.

What are common applications of sputtered Palladium films?

Typical uses include conductive layers, metallization, reflective or protective coatings, and composition-specific PVD research. The exact application depends on the properties of the element and the final film stack.

What information should I send TFM for a custom Palladium target?

Please provide target dimensions, thickness, purity, quantity, target style, backing-plate requirement, cathode model if known, and any tolerance, surface-finish, inspection, or documentation requirements.

Prepare your RFQ: Download the fillable Palladium Sputtering Target, Pd RFQ Worksheet (PDF). Enter the required composition or grade, dimensions, backing or bonding request, quantity, documents, and acceptance criteria for quotation review.

Looking for palladium in evaporation form? See palladium evaporation materials (Pd).

Reviews

There are no reviews yet.

Be the first to review “Palladium Sputtering Target, Pd”

Your email address will not be published. Required fields are marked *

Related Products

FAQ

It’s the source material (in solid form) used in sputter deposition to eject atoms or molecules that then form a thin film on a substrate.

Targets can be pure metals (e.g., gold, copper, aluminum), ceramics (e.g., Al₂O₃, SiO₂, TiO₂), alloys, or composites—chosen based on the film’s desired properties.

 

Manufacturing routes depend on the material and target specification. Metal targets may be cast and machined, while some ceramic targets are consolidated by sintering. Ask for the product-specific route and inspection criteria when these affect qualification.

 

In a vacuum chamber, a plasma (typically argon) bombards the target, ejecting atoms that travel and condense on a substrate, forming a thin film.

 

Key factors include the target’s purity, density, grain structure, and the sputtering yield (i.e. how many atoms are ejected per incident ion), as well as operating conditions like power density and gas pressure.

 

Operators monitor target erosion (often by measuring the depth of the eroded “race track”) or track total energy delivered (kilowatt-hours) until it reaches a threshold that can compromise film quality.

 

Bonding may be selected for brittle targets, thinner precious-metal targets, or a cathode that needs a specific backing and cooling arrangement. It is not a universal requirement. Provide target and backing dimensions, the cathode model, and operating conditions for assembly review.

 

DC is commonly used with conductive targets. RF is often used for poorly conducting or insulating targets to mitigate surface charging; other power modes may be suitable depending on the target, cathode, and process. Confirm the mode against the equipment and material.

 

In reactive sputtering, a reactive gas (e.g., oxygen or nitrogen) is introduced to form compound films on the substrate, but it may also “poison” the target surface if not carefully controlled.

 

Customer-supplied powder acceptance is not assumed. Provide material identity, lot traceability, composition and impurity analysis, quantity, and handling constraints in the RFQ. TFM must confirm feasibility and acceptance criteria before any material is sent.

 

Targets should be stored in clean, dry conditions (often in original packaging or re-wrapped in protective materials) and handled with gloves to avoid contamination, ensuring optimal performance during deposition.

Deposition rate depends on factors such as target material and composition, power density, working gas pressure, substrate distance, and the configuration of the sputtering system (e.g., magnetron design).

 
Shopping Cart
Scroll to Top