What is a platinum sputtering target?
A platinum (Pt) sputtering target is an elemental-metal source for depositing Pt-containing thin films by physical vapor deposition. The ordered target grade and assembly must be matched to the film's contamination limits and the cathode drawing; target composition alone does not establish film acceptance.
Using evaporation instead? See the platinum evaporation material page for the corresponding product form.
Explore related materials in the Sputtering Targets catalog.

Material and Deposition Characteristics
Because the target is electrically conductive, DC magnetron sputtering is often applicable, although pulsed-DC or other power modes may also be used depending on the deposition system and film target. For high-specification films, target grain structure, residual stress, and surface preparation can influence erosion uniformity and the morphology of the deposited layer. When higher power loading or system-specific mounting is involved, a bonded target assembly may also be considered.
How to specify platinum sputtering target for an RFQ
The following fields define the order and the tests needed to qualify this target; final availability and acceptance criteria belong in the approved quotation or drawing.
| Decision | Information to provide or verify |
|---|---|
| Material identity | State the Pt purity basis and the specific trace elements that matter to the film specification; request lot evidence where required. |
| Target and cathode fit | Provide target diameter or outline, thickness, cathode model, mounting interface, and whether a backing plate or bonded assembly is required. |
| Film acceptance | Define film composition, thickness, adhesion or electrical measurements required by the application and the inspection documents needed for acceptance. |
Send the specification and drawing for review. The selected source or target and the deposited film require separate acceptance evidence.
Research applications and film checks
- Platinum electrode films on SiO2 have been investigated using both electron-cyclotron-resonance and DC-magnetron sputtering. The comparison reported differences in flatness, adhesion and resistivity, illustrating that the process matters as well as the Pt source (research example).
- For an electrode or contact layer, specify the substrate, adhesion-layer strategy, post-treatment and required electrical/adhesion tests. Qualify the final Pt film and interfaces in the intended stack.
- Confirm target purity, dimensions and cathode fit in the RFQ; do not treat published film behavior as a guaranteed outcome of the supplied target.
Target Configuration and Ordering Considerations
For quotation and manufacturability review, provide target size, thickness, purity or alloy composition, quantity, and the sputtering gun or cathode model if known. If a bonded assembly is required, include backing-plate material, bonding preference, and any dimensional tolerances, surface-finish needs, or inspection-document requirements. TFM can also review customer drawings or old-target samples for replacement builds.
Typical specification reference: Download the Platinum Sputtering Target Typical Specification Sheet (PDF). This planning reference is not a batch CoA; confirm final specifications and batch documentation in the quotation.
Frequently Asked Questions
Can Platinum sputtering targets be used with DC magnetron sputtering?
Yes. Conductive metallic targets are commonly processed with DC magnetron sputtering, although pulsed-DC or other modes may also be used depending on the equipment and film objective.
What purity grade should I choose for a Platinum target?
The required purity should be selected from the contamination limits and performance needs of the deposited film. Higher purity can reduce unwanted impurities, but the optimum grade should match the application rather than default to the highest available level.
Why do density and microstructure matter for Platinum targets?
Target density, grain structure, and residual stress can influence erosion behavior, process stability, and the morphology of the deposited film. These factors become more important as film-quality requirements become tighter.
Can a Platinum target be bonded to a copper backing plate?
Yes. A bonded assembly may be used when the cathode design requires a backing plate or when improved support and heat transfer are desirable. The bonding method should be matched to target thickness and operating conditions. Review the bonded vs unbonded sputtering target selection guide when comparing assembly options.
What are common applications of sputtered Platinum films?
Typical uses include conductive layers, metallization, reflective or protective coatings, and composition-specific PVD research. The exact application depends on the properties of the element and the final film stack.
What information should I send TFM for a custom Platinum target?
Please provide target dimensions, thickness, purity, quantity, target style, backing-plate requirement, cathode model if known, and any tolerance, surface-finish, inspection, or documentation requirements through the TFM contact and RFQ path.





Reviews
There are no reviews yet.