What is a silver sputtering target?
A silver sputtering target is a solid elemental Ag source for sputter deposition, with geometry matched to the sputtering cathode. Silver evaporation material is a separate source form selected for an evaporation system. Confirm the deposition route before specifying geometry. Compare the Silver (Ag) Evaporation Material when defining the source form.
Explore related material families and formats in the Sputtering Targets catalog.


Material and Deposition Characteristics
Because the target is electrically conductive, DC magnetron sputtering is often applicable, although pulsed-DC or other power modes may also be used depending on the deposition system and film target. For high-specification films, target grain structure, residual stress, and surface preparation can influence erosion uniformity and the morphology of the deposited layer. When higher power loading or system-specific mounting is involved, a bonded target assembly may also be considered.
Silver Reference and RFQ
| Material identity | Elemental silver (Ag); atomic number 47; CAS 7440-22-4. |
|---|---|
| Elemental melting point | 961.78 °C (RSC reference). |
| Elemental density | 10.5 g/cm³ at room temperature (RSC reference), not a target-density acceptance limit. |
| Purity and impurities | Specify the required Ag grade and individual impurity limits from the film contamination requirements; confirm the analysis method and acceptance basis. |
| Geometry and assembly | Provide target diameter or drawing, thickness, tolerances, cathode model and backing interface. Bond method and finished assembly dimensions require order-specific agreement. |
| Documentation | Specify sample/lot traceability, analysis method, inspection records and the agreed acceptance limits. |
Element reference: Royal Society of Chemistry – Silver. Product grade, dimensions, assembly and availability are confirmed in the quotation.
Film Requirements to Define Before Ordering
For electrical or optical layer development, specify the substrate, layer stack, film thickness and required continuity, adhesion or optical measurements. Bulk silver reference properties do not establish the performance of a deposited Ag film; qualify the film under the intended processing and exposure conditions.
Target Configuration and Ordering Considerations
For quotation and manufacturability review, provide target size, thickness, purity or alloy composition, quantity, and the sputtering gun or cathode model if known. If a bonded assembly is required, include backing-plate material, bonding preference, and any dimensional tolerances, surface-finish needs, or inspection-document requirements. TFM can also review customer drawings or old-target samples for replacement builds.
Typical specification reference: Download the Silver Sputtering Target Typical Specification Sheet (PDF). This planning reference is not a batch CoA; confirm final specifications and batch documentation in the quotation.
Frequently Asked Questions
Can Silver sputtering targets be used with DC magnetron sputtering?
Yes. Conductive metallic targets are commonly processed with DC magnetron sputtering, although pulsed-DC or other modes may also be used depending on the equipment and film objective.
What purity grade should I choose for a Silver target?
The required purity should be selected from the contamination limits and performance needs of the deposited film. Higher purity can reduce unwanted impurities, but the optimum grade should match the application rather than default to the highest available level.
Why do density and microstructure matter for Silver targets?
Target density, grain structure, and residual stress can influence erosion behavior, process stability, and the morphology of the deposited film. These factors become more important as film-quality requirements become tighter.
Can a Silver target be bonded to a copper backing plate?
A copper-backed assembly is an option to review against the cathode and target requirements. Provide the target thickness, backing dimensions, interface drawing and operating conditions; confirm bond method and compatibility in the quotation. The bonded versus unbonded target guide explains the assembly information to compare.
What are common applications of sputtered Silver films?
Typical uses include conductive layers, metallization, reflective or protective coatings, and composition-specific PVD research. The exact application depends on the properties of the element and the final film stack.
What information should I send TFM for a custom Silver target?
Please provide target dimensions, thickness, purity, quantity, target style, backing-plate requirement, cathode model if known, and any tolerance, surface-finish, inspection, or documentation requirements through the TFM contact and RFQ path.




Reviews
There are no reviews yet.