Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Zinc Fluoride Sputtering Target, ZnF2

Material: Zinc Fluoride Sputtering Target
Formula: ZnF2
Catalog No.: TFM-SPT-0674

ZnF2 fluoride target for Zn-F film studies. Define target phase and support, power context, and film fluorine/optical checks. Grade, dimensions, assembly, documentation and availability are confirmed in the quotation.

What is a zinc fluoride sputtering target?

A zinc fluoride (ZnF2) sputtering target is a fluoride-compound source for Zn-F thin-film studies. Target chemistry does not establish fluorine retention or the optical properties of the deposited film; those outputs need process-specific measurement.

Explore related materials in the Sputtering Targets catalog.


Zinc
Fluorine

Material and Deposition Characteristics

The appropriate sputtering mode depends on target conductivity, thermal behavior, and the power-supply configuration. Many compound ceramic targets are evaluated first with RF magnetron sputtering, especially when electrical resistivity is high. For brittle or low-thermal-conductivity materials, density, backing support, and stable cooling are important for reliable operation.

How to specify zinc fluoride sputtering target for an RFQ

The following fields define the order and the tests needed to qualify this target; final availability and acceptance criteria belong in the approved quotation or drawing.

DecisionInformation to provide or verify
Material identitySpecify ZnF2 composition or phase, purity and density evidence, and limits for relevant oxide or moisture contamination.
Target and cathode fitProvide target geometry, backing/support requirements, cooling and qualified power-mode context.
Film acceptanceSet film Zn:F composition, phase, thickness and optical measurements required by the layer design.

Send the specification and drawing for review. The selected source or target and the deposited film require separate acceptance evidence.

Research applications and film checks

  • ZnF2 has been studied as a sputtering source for fluorine-doped ZnO thin films after processing, illustrating that a ZnF2 target does not by itself guarantee a ZnF2 film (research example).
  • State whether the intended layer is ZnF2, fluorine-doped ZnO or another Zn-F-O composition, and define fluorine retention, phase, thickness and optical/electrical measurements accordingly.
  • Match the target phase, support, power mode, oxygen/moisture control and any post-treatment to the selected film route before setting acceptance criteria.

Target Configuration and Ordering Considerations

When requesting a quotation, provide target diameter or rectangular dimensions, thickness, purity or composition, required quantity, and whether a backing plate or bonded assembly is needed. For brittle ceramic or compound targets, it is useful to specify the cathode model, backing-plate material, preferred bonding method, operating power if known, and any density, tolerance, or inspection-document requirements. TFM can review drawings, old-target photos, and application details when custom dimensions are required.

Frequently Asked Questions

What is the main reason to use a Zinc Fluoride sputtering target?

It provides a composition-specific source for depositing thin films when the required chemistry is better introduced from a pre-compounded target than from co-sputtering separate elements.

How should the sputtering mode for Zinc Fluoride be selected?

The power mode should be selected from target conductivity, thermal behavior, and equipment capability. Many compound ceramic targets are first evaluated with RF magnetron sputtering.

Why are density and microstructure important for Zinc Fluoride targets?

Uniform density and microstructure help support stable erosion and thermal behavior, while pores or local defects can increase the risk of cracking, particles, or unstable plasma.

Can a Zinc Fluoride target be supplied with a backing plate?

Yes. Where the material is brittle or the cathode requires a backing assembly, bonded configurations can be reviewed according to target size, thickness, cooling, and operating power.

Does target composition always equal film composition?

No. Film chemistry can shift because of different sputtering yields, reactive conditions, substrate temperature, re-sputtering, or chamber history. Verify the film when the chemistry is critical.

What should I provide to request a quotation for Zinc Fluoride?

Please provide material composition, purity, dimensions, quantity, target or backing configuration, cathode model or system details, and any drawing, tolerance, or inspection requirements.

Prepare your RFQ: Download the fillable Zinc Fluoride Sputtering Target, ZnF2 RFQ Worksheet (PDF). Enter the required composition or grade, dimensions, backing or bonding request, quantity, documents, and acceptance criteria for quotation review.

Reviews

There are no reviews yet.

Be the first to review “Zinc Fluoride Sputtering Target, ZnF2”

Your email address will not be published. Required fields are marked *

FAQ

It’s the source material (in solid form) used in sputter deposition to eject atoms or molecules that then form a thin film on a substrate.

Targets can be pure metals (e.g., gold, copper, aluminum), ceramics (e.g., Al₂O₃, SiO₂, TiO₂), alloys, or composites—chosen based on the film’s desired properties.

 

Manufacturing routes depend on the material and target specification. Metal targets may be cast and machined, while some ceramic targets are consolidated by sintering. Ask for the product-specific route and inspection criteria when these affect qualification.

 

In a vacuum chamber, a plasma (typically argon) bombards the target, ejecting atoms that travel and condense on a substrate, forming a thin film.

 

Key factors include the target’s purity, density, grain structure, and the sputtering yield (i.e. how many atoms are ejected per incident ion), as well as operating conditions like power density and gas pressure.

 

Operators monitor target erosion (often by measuring the depth of the eroded “race track”) or track total energy delivered (kilowatt-hours) until it reaches a threshold that can compromise film quality.

 

Bonding may be selected for brittle targets, thinner precious-metal targets, or a cathode that needs a specific backing and cooling arrangement. It is not a universal requirement. Provide target and backing dimensions, the cathode model, and operating conditions for assembly review.

 

DC is commonly used with conductive targets. RF is often used for poorly conducting or insulating targets to mitigate surface charging; other power modes may be suitable depending on the target, cathode, and process. Confirm the mode against the equipment and material.

 

In reactive sputtering, a reactive gas (e.g., oxygen or nitrogen) is introduced to form compound films on the substrate, but it may also “poison” the target surface if not carefully controlled.

 

Customer-supplied powder acceptance is not assumed. Provide material identity, lot traceability, composition and impurity analysis, quantity, and handling constraints in the RFQ. TFM must confirm feasibility and acceptance criteria before any material is sent.

 

Targets should be stored in clean, dry conditions (often in original packaging or re-wrapped in protective materials) and handled with gloves to avoid contamination, ensuring optimal performance during deposition.

Deposition rate depends on factors such as target material and composition, power density, working gas pressure, substrate distance, and the configuration of the sputtering system (e.g., magnetron design).

 
Shopping Cart
Scroll to Top