Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Hafnium Oxide Sputtering Target, HfO2

Chemical Formula: HfO2
Catalog Number: TFM-SPT-0248
CAS Number: 12055-23-1

Hafnium oxide (HfO2) source material for sputtering. Specify the composition and purity basis, target drawing, cathode, backing or bonding requirements, quantity, and acceptance documents. Listed options include different configurations; confirm the exact grade, composition, geometry and assembly in the quotation and approved specification.

CoA_HfO2

What is a hafnium oxide sputtering target?

A hafnium oxide sputtering target is a ceramic HfO2 source used to deposit hafnium-oxide-based thin films by sputtering. The product RFQ should define the requested composition and purity basis, target geometry, density or microstructure acceptance method, cathode and backing requirements, and lot documentation. Target properties and process conditions can influence deposition behavior, but the final film composition and performance must be verified on the intended process.

Use the Sputtering Targets catalog when the material family or target format is still being selected.


Hafnium
Oxygen

Material and Deposition Characteristics

RF magnetron sputtering is commonly considered for insulating or semiconducting oxide targets, while sufficiently conductive formulations may allow alternative power modes in some systems. Target density and microstructural uniformity matter because pores, cracks, and local inhomogeneities can contribute to unstable plasma, particles, or target damage. For brittle ceramics, bonded assemblies and gradual power ramping are often worth evaluating.

HfO2 sputtering target selection data

Selection fieldWhat to specifyWhy it matters
Material identityHfO2, requested stoichiometry or composition, and purity basisDefines the ceramic source and the order-specific chemistry requirement
Target geometryPlanar or other approved format, finished dimensions, tolerances, quantity, and drawing revisionConnects the material requirement to the cathode and approved drawing
Density and microstructureRequired value or acceptance method, sampling, and test-document expectationAvoids treating an unspecified catalog number as the order requirement
Backing and bondingCathode model, backing material and dimensions, interface requirement, cooling, and operating contextAllows mechanical support and thermal-path requirements to be reviewed together
Deposition and film checksPower mode plus required film composition, thickness, electrical, optical, structural, or defect measurementsThe deposited film must be qualified under the intended process window
Inspection and documentsList required dimensional, composition, visual, density, or lot-document evidenceKeeps acceptance evidence distinct from generic catalog statements

Typical Thin-Film Applications

  • Hafnium-oxide dielectric, optical, protective, and other functional-film research
  • Semiconductor, sensor, photonic, and multilayer studies where the approved layer design specifies HfO2
  • Projects that define film composition, thickness, electrical, optical, structural, or defect acceptance measurements

Application fit depends on the complete layer design and qualified deposition route. Compare thin-film application categories before finalizing the product specification.

Target Configuration and Ordering Considerations

For an HfO2 target quotation, provide composition and purity basis, finished dimensions and drawing revision, quantity, cathode model, backing and interface requirements, cooling and operating context, plus any density, tolerance, inspection, or lot-document requirements. Send the available target drawing and acceptance criteria to TFM for review; unlisted dimensions, bonding, inspection, and performance requirements remain subject to quotation and approved specification.

Technical resources: use the HfO2 sputtering vs ALD guide for deposition-route comparison and the HfO2 target purity and density guide for film-verification and supplier-document questions. This product page remains the commercial owner for target selection and RFQ intent.

Frequently Asked Questions

Is Hafnium Oxide better suited to RF or DC sputtering?

RF magnetron sputtering is commonly considered for insulating or semiconducting oxide targets. If a specific formulation is sufficiently conductive, other modes may also be possible, but the equipment and target properties should be confirmed.

Why is density important for a Hafnium Oxide target?

Density and microstructural uniformity affect erosion stability, thermal behavior, and particle risk. Pores, cracks, or local density variations can contribute to unstable sputtering and target damage.

Should a Hafnium Oxide target be bonded to a backing plate?

Bonding is often useful for brittle oxide targets because it can improve mechanical support and heat transfer. The backing material and bonding method should be chosen according to target size, thickness, and operating conditions.

Will the deposited film always have the same composition as HfO2?

Not always. Film composition can be affected by preferential sputtering, reactive gas, substrate temperature, re-sputtering, and chamber conditions. Composition-sensitive films should be verified after deposition.

How should power be ramped on a brittle Hafnium Oxide target?

A conservative power ramp and stable cooling are generally advisable. The exact operating procedure should follow the target size, bonding condition, cathode design, and supplier recommendations rather than a universal wattage.

What information should I provide when ordering Hafnium Oxide?

Provide formula or composition, purity, dimensions, quantity, backing and bonding requirements, cathode model or drawing, and any density, tolerance, or inspection requirements.

Prepare your RFQ: Download the fillable Hafnium Oxide Sputtering Target, HfO2 RFQ Worksheet (PDF). Enter the required composition or grade, dimensions, backing or bonding request, quantity, documents, and acceptance criteria for quotation review.

Order Now

HfO₂ Target, ø2" × 0.125" w/. Cu B/Plate, HfO₂ Target, ø2" × 0.25" w/. Cu B/Plate, HfO₂ Target 99.99% Purity ø50.8*4.0mm, HfO₂ Target 4N ø76.2×3.18mm Elastomer Bonded 2.54mm Cu B/Plate, HfO₂ Target 4N ø50.8*3mm Indium Bonded 3mm Cu B/Plate, HfO₂ Disc 4N ø12.7*2mm, HfO₂+2%Ti Target 4N ø50.8*3mm Indium Bonded 3mm Cu B/Plate, HfO₂+2%Ti Disc 4N ø12.7*2mm, HfO₂ target 3N ø4"×8mm, HfO₂ target 4N 2"×3 mm In Bonded 2 mm Cu B/Plate, HfO₂ target Ø2"×4 mm In Bonded 3 mm Cu BP, HfO₂ target Ø0.5"×2 mm, HfO₂ target Ti 2 at% doped Ø2"×3 mm In Bonded 3 mm Cu BP, HfO₂ target Ti 2 at% doped Ø0.5"×2 mm

Reviews

There are no reviews yet.

Be the first to review “Hafnium Oxide Sputtering Target, HfO2”

Your email address will not be published. Required fields are marked *

FAQ

It’s the source material (in solid form) used in sputter deposition to eject atoms or molecules that then form a thin film on a substrate.

Targets can be pure metals (e.g., gold, copper, aluminum), ceramics (e.g., Al₂O₃, SiO₂, TiO₂), alloys, or composites—chosen based on the film’s desired properties.

 

Manufacturing routes depend on the material and target specification. Metal targets may be cast and machined, while some ceramic targets are consolidated by sintering. Ask for the product-specific route and inspection criteria when these affect qualification.

 

In a vacuum chamber, a plasma (typically argon) bombards the target, ejecting atoms that travel and condense on a substrate, forming a thin film.

 

Key factors include the target’s purity, density, grain structure, and the sputtering yield (i.e. how many atoms are ejected per incident ion), as well as operating conditions like power density and gas pressure.

 

Operators monitor target erosion (often by measuring the depth of the eroded “race track”) or track total energy delivered (kilowatt-hours) until it reaches a threshold that can compromise film quality.

 

Bonding may be selected for brittle targets, thinner precious-metal targets, or a cathode that needs a specific backing and cooling arrangement. It is not a universal requirement. Provide target and backing dimensions, the cathode model, and operating conditions for assembly review.

 

DC is commonly used with conductive targets. RF is often used for poorly conducting or insulating targets to mitigate surface charging; other power modes may be suitable depending on the target, cathode, and process. Confirm the mode against the equipment and material.

 

In reactive sputtering, a reactive gas (e.g., oxygen or nitrogen) is introduced to form compound films on the substrate, but it may also “poison” the target surface if not carefully controlled.

 

Customer-supplied powder acceptance is not assumed. Provide material identity, lot traceability, composition and impurity analysis, quantity, and handling constraints in the RFQ. TFM must confirm feasibility and acceptance criteria before any material is sent.

 

Targets should be stored in clean, dry conditions (often in original packaging or re-wrapped in protective materials) and handled with gloves to avoid contamination, ensuring optimal performance during deposition.

Deposition rate depends on factors such as target material and composition, power density, working gas pressure, substrate distance, and the configuration of the sputtering system (e.g., magnetron design).

 
Shopping Cart
Scroll to Top